Mechanical Part

Haldex #800404K Air Dryer Purge Valve that is brand new in box just dont need anym

2024-10-01 06:42:51

ore

Nortonville, ND

$20

2024-10-01 06:42:45

Mopar Cometics 4.600 Bore head gaskets. .040 thick. Part number C5799-040

Brand new needed a different thickness for build

Nortonville, ND

$150

2024-09-26 12:39:13

Edelbrock MAX-FIRE LS wires

I trimmed one of them to get by my header before I decided to go a different direction. One boot pulled out from the wire. Probably an easy fix but I needed a different

Valley City, ND

$35

2024-09-21 18:40:05

I have a 350 motor for sale

Jamestown, ND

Manton Series 4 Pushrods 3/8”x.145” Wall 8.200” length. Have 5/16” tips on

2024-09-21 07:21:49

each end. Set of 8. Brand new just ordered the wrong length.

Nortonville, ND

$150

2024-09-18 07:09:53

FOR SALE: Radiator for 1993 Chevrolet S-10 Blazer

I have for sale a radiator from a 1993 Chevrolet S-10 Blazer. Radiator does not leak and is in very good condition. Located near Gackle, ND

Gackle, ND

$150 OBO

2024-09-16 07:19:06

Coil spring compressor

For early Mustangs, Fairlane, Couger, Maverick etc. With thrust bearing, allows you to replace suspension parts without having to remove coil spring also.

Jamestown, ND

$50

2024-09-16 06:23:33

International 236/282 6 Cylinder Engine Block. Standard bore 3.688.” Don’t nee

d it anymore. Call or text 701-709-0528

Nortonville, ND

$100

2024-09-14 07:36:17

Big block chevy steel crankshaft for sale. It is a 6223 with the short 3.766 stro

ke, like 396 402 427 Has been balanced to turn some serious rpm, this crank in one of the blower motors has turned

McHenry, ND

$300

2024-09-13 08:51:28

1 new LB7 Duramax injector

I have one brand new LB7 Duramax injector for 2001-2004 Duramaxes and a set of Injector seal and return line kit for one side of the injectors. They all came from Merchant

Cooperstown, ND

FOR SALE: SNOWDOGG VXF85 PICKUP MOUNT SNOWPLOW

2024-09-13 06:26:15

5 Photos

I have for sale SNOWDOGG VXF85 pickup mount snowplow. Plow is in like brand new condition. Plow has 3 electric over hydraulic rams on for straight

Gackle, ND

$8,500

2024-09-11 07:58:50

2009 Laramie dodge 1500

parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back

Marion, ND

$2,400 OBO

2024-09-09 06:00:29

1969 Camaro Rhodes Race Cars 18-3104 Fuel Tank with Sump. 0-90ohm sending unit. Co

mes with mounting straps also. Bought and realized it only fits 1969 so it didn’t fit our application. Brand new

Nortonville, ND

$400

2024-09-05 00:05:01

NEW-Ford F150 5.4L engine parts

NEW OEM Ford F150 parts for 5.4L engine 5 Motorcraft ignition coils-$125 2 Motorcraft tension pulleys-$60 Located in Jamestown, ND. Local pick up or can ship for free.

Jamestown, ND

Multiple Prices

2024-08-19 07:09:48

Electric engine fan. Derale. Never used.

Jamestown, ND

$250

2024-08-10 10:27:20

6 Photos

AFE ait intake and intercooler piping for 2006-2007 chevy/gmc duramax engine's.

Buchanan, ND

$300

2024-08-06 21:56:48

Rear drive shaft assy 05-08 Dodge magnum and Chrysler 300

NEW shaft This is for AWD. return shipping cost prohibitive for refund. Please read info on photos for details of shaft. listing this

Valley City, ND

$175

2024-07-31 01:08:46

8 Photos

2006 Chevrolet Silverado 3500 4X4 4dr Crew Cab

Located @ R&B Motorsports, Jamestown ND 58401, Phone Number Is 701-251-2374, Very Clean 1 Ton Crew Cab 4x4, Low Miles for the year, 6.0Litre V-8 Fuel Injection Engine, Checked Over Serviced, 2 New

LaMoure, ND

$9,990

2024-07-26 05:39:54

New Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. 1 each.

I ONLY HAVE ONE Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. Bearing cones, seal, and grease come installed Bolt Pattern: 6 on 5.5" Stud Size: 1/2" 4,400lbs weight capacity.

Jamestown, ND

$40 OBO

2024-06-21 20:05:34

Took it off of my 2019 6.7 dodge Cummins with 40k miles on it

Def tank

Oriska, ND

$1,000

2024-05-15 21:28:33

Cummins oem 5.9 exhaust manifold

3990143 part number

Jamestown, ND

$250 OBO

2024-04-28 12:04:59

Hurst shifter handle and mechanism for A body mopar with no console brand new neve

r used

Streeter, ND

$400

2023-08-13 21:29:12

The turbo works as it should.

OBS 7.3 factory turbo

Streeter, ND

$200

Additional results related to "Mechanical Part Mechanical Part"

2024-10-04 09:51:25

6 Photos

Dodge ram dpf exhaust

New dodge ram dpf exhaust. This is a brand new part.

Jamestown, ND

Haldex #800404K Air Dryer Purge Valve that is brand new in box just dont need anym

2024-10-01 06:42:51

ore

Nortonville, ND

$20

2024-10-01 06:42:45

Mopar Cometics 4.600 Bore head gaskets. .040 thick. Part number C5799-040

Brand new needed a different thickness for build

Nortonville, ND

$150

2024-09-26 12:39:13

Edelbrock MAX-FIRE LS wires

I trimmed one of them to get by my header before I decided to go a different direction. One boot pulled out from the wire. Probably an easy fix but I needed a different

Valley City, ND

$35

2024-09-21 18:40:05

I have a 350 motor for sale

Jamestown, ND

Manton Series 4 Pushrods 3/8”x.145” Wall 8.200” length. Have 5/16” tips on

2024-09-21 07:21:49

each end. Set of 8. Brand new just ordered the wrong length.

Nortonville, ND

$150

2024-09-18 07:09:53

FOR SALE: Radiator for 1993 Chevrolet S-10 Blazer

I have for sale a radiator from a 1993 Chevrolet S-10 Blazer. Radiator does not leak and is in very good condition. Located near Gackle, ND

Gackle, ND

$150 OBO

2024-09-16 07:19:06

Coil spring compressor

For early Mustangs, Fairlane, Couger, Maverick etc. With thrust bearing, allows you to replace suspension parts without having to remove coil spring also.

Jamestown, ND

$50

2024-09-16 06:23:33

International 236/282 6 Cylinder Engine Block. Standard bore 3.688.” Don’t nee

d it anymore. Call or text 701-709-0528

Nortonville, ND

$100

2024-09-14 07:36:17

Big block chevy steel crankshaft for sale. It is a 6223 with the short 3.766 stro

ke, like 396 402 427 Has been balanced to turn some serious rpm, this crank in one of the blower motors has turned

McHenry, ND

$300

2024-09-13 08:51:28

1 new LB7 Duramax injector

I have one brand new LB7 Duramax injector for 2001-2004 Duramaxes and a set of Injector seal and return line kit for one side of the injectors. They all came from Merchant

Cooperstown, ND

FOR SALE: SNOWDOGG VXF85 PICKUP MOUNT SNOWPLOW

2024-09-13 06:26:15

5 Photos

I have for sale SNOWDOGG VXF85 pickup mount snowplow. Plow is in like brand new condition. Plow has 3 electric over hydraulic rams on for straight

Gackle, ND

$8,500

2024-09-11 07:58:50

2009 Laramie dodge 1500

parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back

Marion, ND

$2,400 OBO

2024-09-09 06:00:29

1969 Camaro Rhodes Race Cars 18-3104 Fuel Tank with Sump. 0-90ohm sending unit. Co

mes with mounting straps also. Bought and realized it only fits 1969 so it didn’t fit our application. Brand new

Nortonville, ND

$400

2024-09-05 00:05:01

NEW-Ford F150 5.4L engine parts

NEW OEM Ford F150 parts for 5.4L engine 5 Motorcraft ignition coils-$125 2 Motorcraft tension pulleys-$60 Located in Jamestown, ND. Local pick up or can ship for free.

Jamestown, ND

Multiple Prices

2024-08-19 07:09:48

Electric engine fan. Derale. Never used.

Jamestown, ND

$250

2024-08-10 10:27:20

6 Photos

AFE ait intake and intercooler piping for 2006-2007 chevy/gmc duramax engine's.

Buchanan, ND

$300

2024-08-06 21:56:48

Rear drive shaft assy 05-08 Dodge magnum and Chrysler 300

NEW shaft This is for AWD. return shipping cost prohibitive for refund. Please read info on photos for details of shaft. listing this

Valley City, ND

$175

2024-07-31 01:08:46

8 Photos

2006 Chevrolet Silverado 3500 4X4 4dr Crew Cab

Located @ R&B Motorsports, Jamestown ND 58401, Phone Number Is 701-251-2374, Very Clean 1 Ton Crew Cab 4x4, Low Miles for the year, 6.0Litre V-8 Fuel Injection Engine, Checked Over Serviced, 2 New

LaMoure, ND

$9,990

2024-07-26 05:39:54

New Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. 1 each.

I ONLY HAVE ONE Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. Bearing cones, seal, and grease come installed Bolt Pattern: 6 on 5.5" Stud Size: 1/2" 4,400lbs weight capacity.

Jamestown, ND

$40 OBO

2024-06-21 20:05:34

Took it off of my 2019 6.7 dodge Cummins with 40k miles on it

Def tank

Oriska, ND

$1,000

2024-05-15 21:28:33

Cummins oem 5.9 exhaust manifold

3990143 part number

Jamestown, ND

$250 OBO

2024-04-28 12:04:59

Hurst shifter handle and mechanism for A body mopar with no console brand new neve

r used

Streeter, ND

$400

2023-08-13 21:29:12