Mechanical Part

Hurst shifter handle and mechanism for A body mopar with no console brand new neve

r used

Streeter, ND

$400

2024-04-27 14:02:24

2009 Laramie dodge 1500 parting out or will sell as is

2009 Laramie dodge 1500 parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back

Marion, ND

$3,500

2024-04-25 14:01:12

Like new never used 440 Source 5 qt. Oil pan with used 3/8" pickup. $150 OBO

MOPAR 402 Oil Pan

Jamestown, ND

2024-04-25 13:41:02

MOPAR 8-3/4" Yukon 489 Posi 4.10

USA Std Gear ring and pinion. Yukon spool. Yoku with u-bolts for 7290 u-joint. Green axle bearings with retainers and gaskets. SKF 15460 inner axle seals. $850

Jamestown, ND

$850 OBO

2024-04-23 03:10:58

4 Photos

Toyota Camry Front Struts--- NEW

1 Pair Strut spring assembly. Fit 2007-2011 Toyota Camry/Avalon 2 Sway bar links also.

Jamestown, ND

$75

2024-04-22 17:56:28

Rear CV Axles for 2008 chrysler pacifica. Brand new in box and plastic bag they ca

me in. Trackmotive ch8278 and 8277. I know they are good in several other vehicles but cannot recall which ones.

Jamestown, ND

$100

2024-04-19 18:24:03

5.9 Cummins CP3

Good used

Jamestown, ND

Manton Series 4 Pushrods 3/8”x.145” Wall 8.200” length. Have 5/16” tips on

2024-04-19 06:12:50

each end. Set of 8. Brand new just ordered the wrong length.

Nortonville, ND

$150

2024-04-17 19:35:26

6 Photos

3406E 5EK Cat engine block for sale. Engine block has been to the machine shop

where it was decked, line bored, and cleaned. Have all the paperwork on that and the receipt. Was gonna do an engine

Berlin, ND

$4,000 OBO

2024-04-17 17:27:01

1998 5.9 Cummins with nv4500 transmission

transfer case I have for sale is 1998 5.9 Cummins with vp44 with 160000 miles on it run good put new seals in it have nv4500 5 speed transmissions

Streeter, ND

$5,500 OBO

2024-04-17 06:19:22

Frostbite FB138 New Pontiac Aluminum Radiator. Bought it for a 1966 GTO but don’

t need it anymore. Call or text with any questions 701-709-0528

Nortonville, ND

$250

2024-04-16 21:35:02

Visor off 2022 Kenworth W990. Will fit other years and models as well. Looks good.

Lights work as should. Just went bigger. $150.

Cooperstown, ND

$150

2024-04-14 06:21:40

International 236/282 6 Cylinder Engine Block. Standard bore 3.688.” Don’t nee

d it anymore. Call or text 701-709-0528

Nortonville, ND

$100

2024-04-07 09:29:12

1969 Camaro Rhodes Race Cars 18-3104 Fuel Tank with Sump. 0-90ohm sending unit. Co

mes with mounting straps also. Bought and realized it only fits 1969 so it didn’t fit our application. Brand new

Nortonville, ND

$500

2024-04-07 00:33:17

FORD 9" REAR DIFFERENTIAL W/ LEAF SPRINGS AND 3RD MEMBER

REAR DIFFERENTIAL FROM A 1967 F100 WITH 3.25 GEAR RATIO AND 5-LEAF SPRINGS. NEW AXLE SEALS. SANDBLASTED AND COATED IN BLACK EPOXY. $550/OBO

Jamestown, ND

$550

2024-04-06 15:34:06

Exhaust Manifold Ford OEM

Originally bought for 2014 F150. 5.0 Liter engine, left side. Gaskets, bolts, and nuts come with. $75 is half price for everything.

Valley City, ND

$75

2024-04-03 18:50:01

NEW-Ford F150 5.4L engine parts

NEW Ford F150 parts for 5.4L engine 5 Motorcraft ignition coils-$140 2 Motorcraft tension pulleys-$75 Located in Jamestown, ND. Local pick up or can ship for free.

Jamestown, ND

Multiple Prices

2024-04-03 09:58:57

Used plenum and intake manifold off an 1987 ford 302 if interested please give me

a call

Kulm, ND

1 new LB7 Duramax injector

2024-04-02 09:06:54

I have one brand new LB7 Duramax injector for 2001-2004 Duramaxes and a set of Injector seal and return line kit for one side of the injectors. They all came from Merchant

Cooperstown, ND

2024-04-01 00:11:15

tranny cooler. came off 2001 dodge cummins. with 47re auto tranny. works fine

no leaks. i just put an aftermarket one on. text or call 701-840-818three

Rogers, ND

$40

2024-03-08 13:02:56

Big block chevy steel crankshaft for sale. It is a 6223 with the short 3.766 stro

ke, like 396 402 427 Has been balanced to turn some serious rpm, this crank in one of the blower motors has turned

McHenry, ND

$300

2024-03-03 22:27:22

Looking for 200-4R transmission any condition

Looking for a 200-4R but would consider 2wd 700R4/4L60 also. Let me know what you've got and what you want for it.

Jamestown, ND

2024-01-31 23:19:56

rear posi differential Ram 1500

rear posi differential carrier Ram 1500 I bought a damaged 2002 pickup. Turns out the rear axle housing had a hole gouged into it and is unusable. The ring gear has broken teeth but the rest of the

Valley City, ND

$100

2024-01-14 21:17:15

Starter for 1999-2006 GMC and Chevy 5.3

Used, works good. Needs new bearings. Pulled off a 2005 GMC Sierra at 110,000 miles. Located in Wahpeton but frequent Jamestown.

Jamestown, ND

$50

2023-12-22 06:12:00

New Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. 1 each.

I ONLY HAVE ONE Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. Bearing cones, seal, and grease come installed Bolt Pattern: 6 on 5.5" Stud Size: 1/2" 4,400lbs weight capacity.

Jamestown, ND

$50 OBO

2023-10-27 20:37:19

2008 dodge 6.7 Cummins EGR parts.

They have around 70,000 miles on them. No issues when removed. What you see is what you get. EGR cooler, bracket, valve exhaust adapter, clamps, hardware, bypass

Medina, ND

$800 OBO

2023-10-06 00:05:33

5.3 GM Engine

Refurbished 5.3 Vortec long block Gen III and IV

Jamestown, ND

$2,195 OBO

2023-08-13 21:29:12

The turbo works as it should.

OBS 7.3 factory turbo

Streeter, ND

$200

Additional results related to "Mechanical Part Other Mechanical Part Other"

2024-04-29 06:03:14

Mopar Cometics 4.600 Bore head gaskets. .040 thick. Part number C5799-040

Brand new needed a different thickness for build

Nortonville, ND

$150

2024-04-29 06:03:06

Haldex #800404K Air Dryer Purge Valve that is brand new in box just dont need anym

ore

Nortonville, ND

$20

2024-04-28 12:04:59

Hurst shifter handle and mechanism for A body mopar with no console brand new neve

r used

Streeter, ND

$400

2024-04-27 14:02:24

2009 Laramie dodge 1500 parting out or will sell as is

2009 Laramie dodge 1500 parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back

Marion, ND

$3,500

2024-04-25 14:01:12

Like new never used 440 Source 5 qt. Oil pan with used 3/8" pickup. $150 OBO

MOPAR 402 Oil Pan

Jamestown, ND

2024-04-25 13:41:02

MOPAR 8-3/4" Yukon 489 Posi 4.10

USA Std Gear ring and pinion. Yukon spool. Yoku with u-bolts for 7290 u-joint. Green axle bearings with retainers and gaskets. SKF 15460 inner axle seals. $850

Jamestown, ND

$850 OBO

2024-04-23 03:10:58

4 Photos

Toyota Camry Front Struts--- NEW

1 Pair Strut spring assembly. Fit 2007-2011 Toyota Camry/Avalon 2 Sway bar links also.

Jamestown, ND

$75

2024-04-22 17:56:28

Rear CV Axles for 2008 chrysler pacifica. Brand new in box and plastic bag they ca

me in. Trackmotive ch8278 and 8277. I know they are good in several other vehicles but cannot recall which ones.

Jamestown, ND

$100

2024-04-19 18:24:03

5.9 Cummins CP3

Good used

Jamestown, ND

Manton Series 4 Pushrods 3/8”x.145” Wall 8.200” length. Have 5/16” tips on

2024-04-19 06:12:50

each end. Set of 8. Brand new just ordered the wrong length.

Nortonville, ND

$150

2024-04-17 19:35:26

6 Photos

3406E 5EK Cat engine block for sale. Engine block has been to the machine shop

where it was decked, line bored, and cleaned. Have all the paperwork on that and the receipt. Was gonna do an engine

Berlin, ND

$4,000 OBO

2024-04-17 17:27:01

1998 5.9 Cummins with nv4500 transmission

transfer case I have for sale is 1998 5.9 Cummins with vp44 with 160000 miles on it run good put new seals in it have nv4500 5 speed transmissions

Streeter, ND

$5,500 OBO

2024-04-17 06:19:22

Frostbite FB138 New Pontiac Aluminum Radiator. Bought it for a 1966 GTO but don’

t need it anymore. Call or text with any questions 701-709-0528

Nortonville, ND

$250

2024-04-16 21:35:02

Visor off 2022 Kenworth W990. Will fit other years and models as well. Looks good.

Lights work as should. Just went bigger. $150.

Cooperstown, ND

$150

2024-04-14 06:21:40

International 236/282 6 Cylinder Engine Block. Standard bore 3.688.” Don’t nee

d it anymore. Call or text 701-709-0528

Nortonville, ND

$100

2024-04-07 09:29:12

1969 Camaro Rhodes Race Cars 18-3104 Fuel Tank with Sump. 0-90ohm sending unit. Co

mes with mounting straps also. Bought and realized it only fits 1969 so it didn’t fit our application. Brand new

Nortonville, ND

$500

2024-04-07 00:33:17

FORD 9" REAR DIFFERENTIAL W/ LEAF SPRINGS AND 3RD MEMBER

REAR DIFFERENTIAL FROM A 1967 F100 WITH 3.25 GEAR RATIO AND 5-LEAF SPRINGS. NEW AXLE SEALS. SANDBLASTED AND COATED IN BLACK EPOXY. $550/OBO

Jamestown, ND

$550

2024-04-06 15:34:06

Exhaust Manifold Ford OEM

Originally bought for 2014 F150. 5.0 Liter engine, left side. Gaskets, bolts, and nuts come with. $75 is half price for everything.

Valley City, ND

$75

2024-04-03 18:50:01

NEW-Ford F150 5.4L engine parts

NEW Ford F150 parts for 5.4L engine 5 Motorcraft ignition coils-$140 2 Motorcraft tension pulleys-$75 Located in Jamestown, ND. Local pick up or can ship for free.

Jamestown, ND

Multiple Prices

2024-04-03 09:58:57

Used plenum and intake manifold off an 1987 ford 302 if interested please give me

a call

Kulm, ND

1 new LB7 Duramax injector

2024-04-02 09:06:54

I have one brand new LB7 Duramax injector for 2001-2004 Duramaxes and a set of Injector seal and return line kit for one side of the injectors. They all came from Merchant

Cooperstown, ND

2024-04-01 00:11:15

tranny cooler. came off 2001 dodge cummins. with 47re auto tranny. works fine

no leaks. i just put an aftermarket one on. text or call 701-840-818three

Rogers, ND

$40

2024-03-08 13:02:56

Big block chevy steel crankshaft for sale. It is a 6223 with the short 3.766 stro

ke, like 396 402 427 Has been balanced to turn some serious rpm, this crank in one of the blower motors has turned

McHenry, ND

$300

2024-03-03 22:27:22

Looking for 200-4R transmission any condition

Looking for a 200-4R but would consider 2wd 700R4/4L60 also. Let me know what you've got and what you want for it.

Jamestown, ND

2024-01-31 23:19:56

rear posi differential Ram 1500

rear posi differential carrier Ram 1500 I bought a damaged 2002 pickup. Turns out the rear axle housing had a hole gouged into it and is unusable. The ring gear has broken teeth but the rest of the

Valley City, ND

$100

2024-01-14 21:17:15

Starter for 1999-2006 GMC and Chevy 5.3

Used, works good. Needs new bearings. Pulled off a 2005 GMC Sierra at 110,000 miles. Located in Wahpeton but frequent Jamestown.

Jamestown, ND

$50

2023-12-22 06:12:00

New Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. 1 each.

I ONLY HAVE ONE Brake Hub Assembly, 6 on 5.5"; 1/2" - 4,400lbs. Bearing cones, seal, and grease come installed Bolt Pattern: 6 on 5.5" Stud Size: 1/2" 4,400lbs weight capacity.

Jamestown, ND

$50 OBO

2023-10-27 20:37:19

2008 dodge 6.7 Cummins EGR parts.

They have around 70,000 miles on them. No issues when removed. What you see is what you get. EGR cooler, bracket, valve exhaust adapter, clamps, hardware, bypass

Medina, ND

$800 OBO

2023-10-06 00:05:33

5.3 GM Engine

Refurbished 5.3 Vortec long block Gen III and IV

Jamestown, ND

$2,195 OBO

2023-08-13 21:29:12